Home / Manage & Monitor / CZone /DC Interfaces / Signal Interface (SI) with seals & connector

Signal Interface (SI) with seals & connector

The Signal Interface connects the CZone system to your external sensors, alarms and switching devices. The Signal Interface allows intelligent, automated operation of circuits depending on the state of the input.

  • Accepts inputs from traditional switch types being used to control outputs.
  • Accepts inputs from switches to trigger alarm i.e. high water float switch.
  • Accepts inputs from industry-standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm).
  • Accepts inputs from general voltaic or resistive signals, can be used for controlling outputs or to display a physical position, e.g. show a hatch is partially open.
  • LED status indicators for each input.
  • Outputs standard NMEA 2000 sentences.
  • Resistive input range 0–1000 Ohm.
  • Voltage sensing input range 0–34 V DC.


Note: High and low alarm levels can be set for all inputs.

Product code: 80-911-0013-00
download pdf


General specifications
Dimensions, hxwxd 100 x 156 x 42 mm
3.9 x 6.1 x 1.7 inch
Protection degree IPX5 water ingress



Signal Interface (SI) with seals & connector

CZone flyer A4



Signal Interface (SI) with seals & connector

CZone SI


Product image

Signal Interface (SI) with seals & connector Small »
Medium »
Large »

CZone family


CZone User Introduction